Supported Pc (D-Sub/Dvi) Input Signal Resolutions; Setting Up Appropriate Output Resolution On Pc - BenQ SQ Series User Manual

Supported PC (D-Sub/DVI) input signal resolutions

Horizontal
Resolution Frequency
720 × 400 31.5
640 × 480 31.5
800 × 600 37.9
1024 × 768 48.4
1280 × 1024 64.0
1360 × 768 47.7
1920 × 1080 67.5
• Resolutions outside of these tables are not recognized and will not be
displayed.
• When you connect the TV to a PC, you should adjust the resolution in the
display properties of the computer to closely match the native resolution of the
TV. For example, 1920×1080 @ 60Hz.
• To view the best quality picture when using the PC input, you will then need to
instruct the TV to calibrate itself to the PC signal timing. To do so, activate the
'Auto Adjust' function in the 'PC' menu.

Setting up appropriate output resolution on PC

Before connecting the TV to a PC to display PC video, please follow the
instructions below (in Windows XP for example) to setup appropriate output
resolution.
1. On Windows Desktop, right-click and select
that appears.
2. Click the
3. Drag the
the "Supported PC (D-Sub/DVI) input signal resolutions" table above. If
your PC supports it, select 1920 × 1080 @ 60Hz as the output resolution
for the best result.
4. Click
OK
5. Switch the PC video output from monitor to the TV.
6. Press
42 Reference
Vertical
Frequency
(KHz) (Hz)
70
60
60
60
60
60
60
tab in the window that follows.
Settings
slider and select a compatible resolution according to
Resolution
to save the setting and close the window.
on the remote control and select the
信号选择 (Input)
Dot Clock
Frequency
(MHz)
VGA-T
25.17 VGA
40.00 VESA
65.00 VESA
108.00 VESA
85.50 VESA
138.50 VESA
from the menu
Properties
Note
input.
PC