Connecting The S-Video Input - BenQ SQ Series User Manual

Connecting the S-Video input

1. Connect the S-Video output of your source device (like a DVD player) to the
jack of the TV's
VIDEO
Pay attention to the alignment of the plugs on the S-Video cable when inserting
so as not to damage any pins.
2. Connect the audio output of the source device to the
input using a suitable RCA type audio cable (not provided).
VIDEO 1
To view video image from this input, press the
remote control and select
You should not connect both a composite Video and an S-Video from the same
device; just one or the other. If you have the choice, use the S-Video instead of
composite Video as an S-video signal provides a higher quality signal to that of
composite Video.
10 Connecting audio and video inputs
SQ 42" Series
PQ 46"/52" Series
input using an S-Video cable (not provided).
VIDEO 1
Video 1S.
Audio
cable
jacks of the TV's
AUDIO
button on the
信号选择 (Input)
S-Video
cable
DVD player
S-