Table of Contents
Advertisement
Channel menu
The available menu items
are dependent on the
input source being
selected. The illustration
is for reference only.
Item
Function
Select the area (country) where this TV is installed.
Area
See the Quick Start Guide for details.
Auto Search
After the TV channels are scanned and stored in the TV's memory
during the Auto Search operation, should the pictures of some TV
Channel
channels look abnormal (distorted/unclear or no sound) you can
edit these channels to correct the image or sound problems, or
manually add new channels by following the steps below:
1. In the
Colour System
2. If the TV channel picture looks abnormal, press
TV System
Manual Search
3. If the TV channel has no sound, press
Fine Tune
4. Press
Save
5. Press
30
OSD (On-Screen Display) menu
Main Menu
Picture
Sound
Channel
PC
Setup
Depending on the market where this TV is sold, the Area option
may become fixed and you can not change it.
menu, press
Channel
then press
or
to select the channel you would like to edit.
You can also use the numeric Channel selection buttons on the
remote control to enter the channel number directly.
and then press
Colour System
different TV Colour System and then press
• China: PAL (NTSC 3.58 or NTSC 4.43 in some areas)
• Hong Kong: PAL
• Middle East: PAL or SECAM
• Russia: SECAM
and then press
System
TV System and then press
• China: DK
• Hong Kong: I
• Middle East: BG
• Russia: DK
to highlight
adjust the reception of TV signal.
to highlight
optimize the reception of TV signal. If the reception is poor,
you may need to re-orient the external TV antenna or use a
signal booster.
Area
Auto Search
Channel
Colour System
TV System
Manual Search
Fine Tune
Save
Move
Enter
or
to select
. Press
OK
. Press
or
OK
:
OK
, and then press
Manual Search
, and then press
Fine Tune
Hong Kong
01
PAL
DK
48.25 MHz
48.25 MHz
Back
Exit
, and
Channel
to highlight
or
to select a
:
OK
to highlight
TV
to select a different
or
to
or
to
Advertisement
Table of Contents
