Symptoms And Possible Causes - Pentair Genesis Series Instruction Manual

SYMPTOMS AND POSSIBLE CAUSES:

SYMPTOM
Unit won't cool
Compressor tries to start but won't run
Unit blows breakers
Getting water in enclosure
For additional technical information (i.e., amp draw, pressures, temperatures) , contact
Pentair Equipment Protection at 800-896-2665.
89104462
Impellers/blowers not running
Compressor not running
Compressor runs, but has bad valves
Loss of refrigerant
Low line voltage at start. Should be +/-10% rated voltage.
Compressor motor stuck
Bad contactor
Bad overload switch
Bad run/start capacitor
Undersized breaker/fuse or not time delayed
Short in system
Drain plugged
Drain tube kinked
Enclosure not sealed (allowing humidity in)
© 2013 Pentair Equipment Protection
POSSIBLE CAUSE
- 35 -