Related Manuals for Pentair SPECTRACOOL series
Summary of Contents for Pentair SPECTRACOOL series
- Page 1 SPECTRACOOL™ Slim Fit Air ConditionerS All modelS INSTRUCTION MANUAL © 2015 Pentair Equipment Protection 89116616 Rev. I P/N 89116616...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Pentair Cooling Sales and Service Contacts ....................4 Warranty and Return Policy ..........................4 General Information ............................5 Standards, CE, Declaration of Conformity ...........................5 Receiving The Air Conditioner .......................... 6 Handling and Testing The Air Conditioner ....................... 6 PHASE MONITOR (460v Only) .............................6... - Page 3 Basic Air Conditioning Trouble Shooting Checklist ......................60 3-Phase Basic Air Conditioning Trouble Shooting Check List - Remote Access Control Version ........61 3-Phase Symptoms and Possible Causes - Remote Access Control Version ..............62 © 2015 Pentair Equipment Protection 89116616 - 3 -...
-
Page 4: Pentair Cooling Sales And Service Contacts
PENTAIR COOLING SALES AND SERVICE CONTACTS EUROPE: Deutschland (Germany) +49 (0) 7082 794 0 France +33 (0) 3 88 90 64 90 Italia (Italy) +39 02 932 714-1 Polska (Poland) +48 22 209 98 37 Россия (Russia) +7 495 926 18 85... -
Page 5: General Information
PENTAIR TECHNICAL SOLUTIONS 2100 Hoffman Way Minneapolis, MN 55303‐1745, USA +1.763.421.2240 main Declaration of Conformity Issued by Manufacturer Pentair Technical Products China dba Hoffman Air Port Industrial Zone Shuangyuan Road South Chengyang District Qingdao, Shandong 266108 China declare at our sole responsibility, that these devices are designed and constructed according to the fundamental safety and health requirements of the relevant EC directives. -
Page 6: Receiving The Air Conditioner
Damage evident upon receipt should be noted on the freight bill. Damage should be brought to the attention of the delivering carrier -- NOT to Pentair Equipment Protection -- within 15 days of delivery. Save the carton and packing material and request an inspection. Then file a claim with the delivering carrier. -
Page 7: General Safety Information
A 10 mm (.40) inside diameter tube can be attached to the fitting and routed to a nearby drain. © 2015 Pentair Equipment Protection 89116616... -
Page 8: Mounting
12. Install two front screws. 13. Carefully reconnect the smart controller connectors . 14. Push the louvered grille and, where applicable, the center panel, onto the front panel. See Figure 6 on page 9. © 2015 Pentair Equipment Protection 89116616 - 8 -... - Page 9 Figure 3 Figure 4 Figure 5 Figure 6 © 2015 Pentair Equipment Protection 89116616 - 9 -...
-
Page 10: Full Recessed Mounting
5. Push the unit into the mounting cutout and secure it using the nuts removed in step 4. 6. Carefully reconnect the smart controller. 7. Push the louvered grille and, where applicable, the center panel, onto the front panel. See Figure 8. Figure 8 Figure 7 © 2015 Pentair Equipment Protection 89116616 - 10 -... -
Page 11: Electrical Installation
NOTE: The controller includes a nominal time delay setting of 5 minutes. Do not decrease the time delay setting to less than 2 minutes, as this may cause rapid cycling of the compressor, which may reduce the life of the compressor. © 2015 Pentair Equipment Protection 89116616 - 11 -... -
Page 12: Smart Controller
ON. If they do turn on, simply hold the “Heating” button for 5 seconds to disable them. Then hold the “Cooling” button for 5 seconds until the snowflake symbol (“G”) displays. © 2015 Pentair Equipment Protection 89116616 - 12 -... -
Page 13: Displaying And Changing Program Variables
OPERATING PARAMETERS Parameter Description Default Value Range Cooling set-point 80°F 72°F to 120°F Cooling differential 7°F ALARM PARAMETERS Parameter Default Value Range Description 125°F High Temperature Alarm 40°F Low Temperature Alarm © 2015 Pentair Equipment Protection 89116616 - 13 -... -
Page 14: Displaying Temperature Sensor #2
NOTE 1: Air inlet temperature sensor will default to air outlet temperature sensor. Cooling set point defaults to 10°C. NOTE 2: Unit continues to operate without evaporator freeze protection. NOTE 3: The MALF high pressure switch is optional. © 2015 Pentair Equipment Protection 89116616 - 14 -... -
Page 15: Remote Access Control
Read current Alarm Status • Read MAC address SOFTWARE AND CONFIGURATION FILE DOWNLOADS The Pentair AC monitor, MIB file, EDS file, EtherNet_IP Object file, Coil Register file and GSDML file for Profinet can be downloaded from www.pentairprotect.com/en/na/Product-EnclosureCoolingHeating. REMOTE ACCESS CONTROL PIN-OUT... -
Page 16: Technical Information
TECHNICAL INFORMATION S06 MODELS 300/500W S06 SCHEMATIC 300/500W © 2015 Pentair Equipment Protection 89116616 - 16 -... -
Page 17: S06 Wire Diagram 300/500W
S06 WIRE DIAGRAM 300/500W © 2015 Pentair Equipment Protection 89116616 - 17 -... -
Page 18: S06 Dimensional Drawings
AND ALARM OUTPUT CONNECTOR 20.94 21.65 COOL 7.06 ELECTRONIC 7.40 AIR OUT CONTROLLER 1.73 AMBIENT AIR IN 5.00 M6 MOUNTING THREADS(4) OPTIONAL FIELD-INSTALLED,CLEANABLE REUSABLE, ALUMINUM INLET FILTER MOUNTS 10.32 BEHIND PLASTIC LOUVER © 2015 Pentair Equipment Protection 89116616 - 18 -... -
Page 19: S06 Installation Instruction
11.50 10.44 21.65 20.63 19.44 21.65 20.25 7.74 9.61 10.00 .315 .315 11.02 11.02 Surface Mount Full Recess Mount Figure 11 S06 300W Cutout Drawing Dashed Lines Represent The Air Conditioner © 2015 Pentair Equipment Protection 89116616 - 19 -... -
Page 20: S06 500W Cutout Drawing
20.94 21.65 20.15 7.40 12.05 7.56 10.32 10.00 .315 .315 11.02 11.02 Surface Mount Partial and Full Recess Mount Figure 12 S06 500W Cutout Drawing Dashed Lines Represent The Air Conditioner © 2015 Pentair Equipment Protection 89116616 - 20 -... -
Page 21: S06 Unit Characteristics
Factory Default Setpoint (°F Controller) SOUND LEVEL At 1 M (dBA) UNIT CONSTRUCTION Material Steel Steel Finish RAL 7035 RAL 7035 UNIT DIMENSIONS Height (mm) Width (mm) Depth (mm) Weight (kg) © 2015 Pentair Equipment Protection 89116616 - 21 -... -
Page 22: S06 Components
Structural Parts Louvered Grill Panel 89105442SP 89105442SP 89105442SP 89105442SP Panel Strike Clip (Pkg. 4) 90245472SP 90245472SP 90245472SP 90245472SP Body Catch Clip (Pkg. 4) 89105486SP 89105486SP 89105486SP 89105486SP Body Front Shell 89104023SP 89104023SP © 2015 Pentair Equipment Protection 89116616 - 22 -... -
Page 23: S10 Models 1000/1500W
S10 MODELS 1000/1500W S10 SCHEMATICS 1000W 115V, 230V 1000W 460V © 2015 Pentair Equipment Protection 89116616 - 23 -... -
Page 24: 1500W 115V
1500W 115V 1500W 230V © 2015 Pentair Equipment Protection 89116616 - 24 -... -
Page 25: 1500W 460V
1500W 460V 89107589 REV. G © 2015 Pentair Equipment Protection 89116616 - 25 -... -
Page 26: S10 Wire Diagrams
S10 WIRE DIAGRAMS 1000W 115V, 230V © 2015 Pentair Equipment Protection 89116616 - 26 -... -
Page 27: 1000W 460V
1000W 460V © 2015 Pentair Equipment Protection 89116616 - 27 -... -
Page 28: 1500W 115V
1500W 115V © 2015 Pentair Equipment Protection 89116616 - 28 -... -
Page 29: 1500W 230V
1500W 230V © 2015 Pentair Equipment Protection 89116616 - 29 -... -
Page 30: 1500W 460V
1500W 460V © 2015 Pentair Equipment Protection 89116616 - 30 -... -
Page 31: S10 Dimensional Drawing
OUTPUT CONNECTOR 37.44 1.78 ELECTRONIC CONTROLLER COOL AMBIENT AIR OUT 11.75 AIR IN 10.75 15.16 3.92 M8 MOUNTING 9.84 OPTIONAL,FIELD-INSTALLED, CLEANABLE THREADS(8) M8 LIFT LUGS REUSABLE,ALUMINUM INLET FILTER MOUNTS BEHIND PLASTIC LOUVER © 2015 Pentair Equipment Protection 89116616 - 31 -... -
Page 32: S10 Installation Instruction
36.22 35.94 10.75 12.19 15.16 14.14 .375 .375 9.84 14.56 15.75 15.75 Surface Mount Partial and Full Recess Mount Figure 13 S10 1000/1500W Cutout Drawing Dashed Lines Represent The Air Conditioner © 2015 Pentair Equipment Protection 89116616 - 32 -... -
Page 33: S10 Unit Characteristics (115V, 230V)
Factory Default Setpoint (°F Controller) SOUND LEVEL At 1 M (dBA) UNIT CONSTRUCTION Material Steel Steel Finish RAL 7035 RAL 7035 UNIT DIMENSIONS Height (mm) Width (mm) Depth (mm) Weight (kg) © 2015 Pentair Equipment Protection 89116616 - 33 -... -
Page 34: S10 Unit Characteristics (460V)
Factory Default Setpoint (°F Controller) SOUND LEVEL At 1 M (dBA) UNIT CONSTRUCTION Material Steel Steel Finish RAL 7035 RAL 7035 UNIT DIMENSIONS Height (mm) Width (mm) Depth (mm) Weight (kg) © 2015 Pentair Equipment Protection 89116616 - 34 -... -
Page 35: S10 Components (1 Phase)
89105411SP 89105411SP 89105411SP Panel Strike Clip (Pkg. 4) 90245472SP 90245472SP 90245472SP 90245472SP 90245472SP Body Catch Clip (Pkg. 4) 89105486SP 89105486SP 89105486SP 89105486SP 89105486SP Body Front Shell 89102598SP 89102598SP 89102598SP 89102598SP 89102598SP © 2015 Pentair Equipment Protection 89116616 - 35 -... -
Page 36: S10 Components (3 Phase)
Louvered Grill Panel 89105410SP (2) Controller Bezel Panel 89105411SP Panel Strike Clip (Pkg. 4) 90245472SP Body Catch Clip (Pkg. 4) 89105486SP Body Front Shell 89102598SP Relay, Overload 89098323SP Relay, Phase Monitor 89097986SP © 2015 Pentair Equipment Protection 89116616 - 36 -... -
Page 37: S16 Models 2000/2500W
S16 MODELS 2000/2500W S16 SCHEMATICS 2000W 115V 2000W 230V © 2015 Pentair Equipment Protection 89116616 - 37 -... -
Page 38: 2000W 460V
2000W 460V 89107589 REV. G 2500W 115V © 2015 Pentair Equipment Protection 89116616 - 38 -... -
Page 39: 2500W 230V
2500W 230V 2500W 460V 89107593 REV. G © 2015 Pentair Equipment Protection 89116616 - 39 -... -
Page 40: 4000W 460V
4000W 460V © 2015 Pentair Equipment Protection 89116616 - 40 -... -
Page 41: S16 Wire Diagrams
S16 WIRE DIAGRAMS 2000W 115V © 2015 Pentair Equipment Protection 89116616 - 41 -... -
Page 42: 2000W 230V
2000W 230V © 2015 Pentair Equipment Protection 89116616 - 42 -... -
Page 43: 2000W 460V
2000W 460V © 2015 Pentair Equipment Protection 89116616 - 43 -... -
Page 44: 2500W 115V
2500W 115V © 2015 Pentair Equipment Protection 89116616 - 44 -... -
Page 45: 2500W 230V
2500W 230V © 2015 Pentair Equipment Protection 89116616 - 45 -... -
Page 46: 2500W 460V
2500W 460V © 2015 Pentair Equipment Protection 89116616 - 46 -... -
Page 47: 4000W 460V
4000W 460V © 2015 Pentair Equipment Protection 89116616 - 47 -... -
Page 48: S16 Dimensional Drawing
OUTPUT CONNECTOR 1.78 ELECTRONIC CONTROLLER COOL AIR OUT 12.80 11.75 9.94 AMBIENT AIR IN 10.82 13.43 M8 MOUNTING 11.02 M8 LIFT LUGS OPTIONAL,FIELD-INSTALLED,CLEANABLE THREADS(10) REUSABLE,ALUMINUM INLET FILTER MOUNTS BEHIND PLASTIC LOUVER. © 2015 Pentair Equipment Protection 89116616 - 48 -... -
Page 49: 4000W
4000W © 2015 Pentair Equipment Protection 89116616 - 49 -... -
Page 50: S16 Installation Instruction
12.80 12.19 9.44 21.83 10.82 11.02 14.56 .375 .375 (10) 15.75 15.75 Surface Mount Partial and Full Recess Mount Figure 14 S16 2000/2500W Cutout Drawing Dashed Lines Represent The Air Conditioner © 2015 Pentair Equipment Protection 89116616 - 50 -... -
Page 51: S16 4000W Cutout Drawing
Surface Mount Partial Recess Mount Figure 15 S16 4000W Cutout Drawing Dashed Lines Represent The Air Conditioner © 2015 Pentair Equipment Protection 89116616 - 51 -... -
Page 52: S16 Unit Characteristics (115V, 230V)
Factory Default Setpoint (°F Controller) SOUND LEVEL At 1 M (dBA) UNIT CONSTRUCTION Material Steel Steel Finish RAL 7035 RAL 7035 UNIT DIMENSIONS Height (mm) 1580 1580 1580 1580 Width (mm) Depth (mm) Weight (kg) © 2015 Pentair Equipment Protection 89116616 - 52 -... -
Page 53: S16 Unit Characteristics (460V)
Factory Default Setpoint (°F Controller) SOUND LEVEL At 1 M (dBA) UNIT CONSTRUCTION Material Steel Finish RAL 7035 UNIT DIMENSIONS Height (mm) 1580 1580 1580 Width (mm) Depth (mm) Weight (kg) © 2015 Pentair Equipment Protection 89116616 - 53 -... -
Page 54: S16 Components )115V, 230V)
Controller Bezel Panel 89105411SP 89105411SP 89105411SP 89105411SP Panel Strike Clip (Pkg. 4) 90245472SP 90245472SP 90245472SP 90245472SP Body Catch Clip (Pkg. 4) 89105486SP 89105486SP 89105486SP 89105486SP Body Front Shell 89107454SP 89107454SP 89102801SP 89102801SP © 2015 Pentair Equipment Protection 89116616 - 54 -... -
Page 55: S16 Components (460V)
Panel Strike Clip (Pkg. 4) 90245472SP 90245472SP 90245472SP Body Catch Clip (Pkg. 4) 89105486SP 89105486SP 89105486SP Body Front Shell 89107454SP 89102801SP 89104006SP Transformer,460/230V 101006128SP 101006128SP 101006128SP Relay, Phase Monitor 89097986SP 89097986SP 89097986SP © 2015 Pentair Equipment Protection 89116616 - 55 -... -
Page 56: Maintenance
CAUTION Operation of the air conditioner in areas containing airborne caustics or chemicals can rapidly deteriorate filters, condenser coils, blowers and motors, etc. Contact Pentair Equipment Protection for special recommendations. © 2015 Pentair Equipment Protection 89116616... -
Page 57: Maintenance / Inspection Recommendations
Check the compressor for proper operation, mounting and visible signs of exposure to high heat. Update maintenance records on the unit and in the management Maintenance Records system. © 2015 Pentair Equipment Protection 89116616 - 57 -... - Page 58 NOTES © 2015 Pentair Equipment Protection 89116616 - 58 -...
-
Page 59: Basic Air Conditioning Trouble Shooting Check List - Remote Access Control Version
6. The compressor and the condenser (Ambient or HOT air) impeller(s) should turn on. Is there adequate airflow? YES, proceed to step 8. NO, possible problem: » Open motor winding(s) » Stuck impeller(s) Repair or Replace defective part » Obstructed wheel(s) » Defective motor capacitor(s) © 2015 Pentair Equipment Protection 89116616 - 59 -... -
Page 60: Basic Air Conditioning Trouble Shooting Checklist
Drain plugged Drain tube kinked Getting water in enclosure Enclosure not sealed (allowing humidity in) Mounting gasket damaged For additional support, refer to Pentair Cooling Sales and Service Contacts on page 4. © 2015 Pentair Equipment Protection 89116616 - 60 -... -
Page 61: 3-Phase Basic Air Conditioning Trouble Shooting Check List - Remote Access Control Version
YES, proceed to step 7. NO, possible problem: » Unit still in Recycle Time Delay mode » Enclosure temperature below cooling Wait and/or heat enclosure thermistor T1 setpoint temperature © 2015 Pentair Equipment Protection 89116616 - 61 -... -
Page 62: 3-Phase Symptoms And Possible Causes - Remote Access Control Version
Short in system Drain plugged Drain tube kinked Getting water in enclosure Enclosure not sealed (allowing humidity in) Mounting gasket damaged For additional technical support, contact Pentair Equipment Protection at 800-896-2665. © 2015 Pentair Equipment Protection 89116616 - 62 -... - Page 63 NOTES © 2015 Pentair Equipment Protection 89116616 - 63 -...
- Page 64 Pentair Equipment Protection 2100 Ho man Way Minneapolis, MN 55303 USA +1.763.422.2211 +1.763.576.3200 PentairProtect.com © 2015 Pentair Equipment Protection 89116616 Rev. I P/N 89116616...