Shaw Direct Satellite TV User Manual page 58

• Optical Digital Audio [Dolby Digital, PCM]:
through the digital Optical cable. "Dolby Digital" will not perform any conversion and will provide
Dolby Digital 5.1 sound on indicated programs when connected to a compatible home theatre
system. "PCM" will convert the audio the PCM format.
If you are connected via HDMI directly to your TV, you may have to select "PCM" in order to
get sound.
• Clock Format [AM/PM, 24 Hour]:
to either 12-hour AM/PM format or 24 hour format.
• Clock display when off [Enabled, Disabled]:
receiver is turned off. HDDSR 605 and HDPVR 630 only.
• Front Panel Display [Bright, Dim]:
605 and HDPVR 630 only.
Remote Control Address: The UHF remote control provided with your HDPVR 630 or HDDSR 605
•
has a range of approximately 150+ feet. If there are other satellite receivers in the vicinity, you
may need to change your remote control address to prevent a different remote from controlling
your receiver. Press ENTER to change your receiver's remote control address – on-screen
instructions will then be provided to pair your remote.
eSATA Hard Drive: Indicates external hard drive status, showing "Connected", "Disconnected",
•
or "Not In Use". Refer back to section 7 for more information.
External Hard Drive Setup:
•
warnings or instructions related to your external hard drive. If you accidentally remove these, or
are not logged into an Owner-level profile when they appear, you can re-launch them by
selecting this button.
Start Early When Possible/End Late When Possible [off, 1-5 minutes]:
•
apply globally to all of your Recording Events. A start early or end late buffer set here will only
activate "when possible", such as when a tuner is scheduled to be free before or after a
recording event. You can also add buffers to specific Recording Events by using the PVR
Options menu, as explained on page 27.
PVR History [0-90 Days]: The PVR History setting determines how much time must pass
•
before your HDPVR records the same episode again.
These settings control the audio signal sent
Hardware Settings
Change the time display for the clock and program information
Turn the front panel clock display on or off while
Brighten or dim the front panel time/channel display. HDDSR
After a reboot, your HDPVR 630 will automatically display any
PVR Settings
These settings will
54