Playing Back Your Recorded Programs; Playback Controls - Shaw Direct Satellite TV User Manual

5B. Playback Controls
After selecting "Watch this recording", you can control playback just like a DVD by using the playback
keys on the remote control:
2 Pressing PAUSE will pause playback at the current position. Press PAUSE or PLAY to resume
playback.
5 6 Use REWIND and FAST FORWARD to move backwards or forward through the recording. There
are three fast forward and rewind speeds available, press the button again to move to the next speed.
You can play back your recordings in slow motion by pressing PAUSE and then REWIND or
FAST FORWARD. There are 2 slow motion speeds available, press the button again to move to
the next speed.
1 Pressing PLAY will always resume playback when paused or if you are rewinding or fast forwarding.
Pressing PLAY while the recording is playing back will display the playback bar, so you can see where
you are in the recording.
If you want to jump to a specific point in the recording, Absolute Jump allows you to do just
that. Use the number keys to enter the point you want to jump to, and then press PLAY to
move to that location. For example, pressing 4, 5, PLAY will move you to 45:00 in the
program.
9 0 The SKIP BACK and SKIP AHEAD buttons skip 10 seconds back and 30 seconds ahead. These
durations can be customized under your "PVR Options," or by pressing OPTIONS, 4, 8, 1.
For ultimate control, use the Absolute Skip feature. Press a number on the remote control,
immediately followed by SKIP BACK or SKIP AHEAD to move that number of minutes in the
recording. For example, pressing 2, SKIP AHEAD will advance you 2 minutes, perfect for
bypassing unwanted sections in your programs.
Use the ENTER button to bring up the Info Banner for the current program. The current date and time,
as well as information for the program you are watching will be displayed.
34