Gear Shifting Assembly - Ossa TR280i Workshop Manual

3- GEAR SHIFTING ASSEMBLY

Once you have taken out the clutch discs, the clip that holds the countershaft sprocket, the sprocket,
the bushing with its two O-rings and the gear shifting pedal, we can separate the gear assembly from the
engine.
The gear system comes out toghether with the shift shaft, and the gear selector assembly. To take it out of
the crankcase, it is necessary to remove the 5 centering screwst; and with some gear engaged, proceed
to take it out, as shown.
Remove the 5 bolts that fix the gear assembly to the crankcase. To
be able to take out the 3 bolts situated behind the clutch crown, the
crown must be turned until the rounded spaces for the key coincide
with the bolt heads.
8
After removing them, the gear assembly can be taken out of the crankcase.
Take off the elastic ring 'circlip', the sprocket and the
gear shifting pedal.
ENGINE PARTS