Active Test; Active Test Screen - Ossa TR280i Workshop Manual

KSCAN

ACTIVE TEST

This function is to execute Active Test items. There are 8 Data Items in one page, and you can scroll
page by clicking [<<] and [>>] buttons. You cannot click any button during Active Test, except [Stop]
button.
1 Active Test Item
2 Icon
3 State text box
4 When Active Test Error is occurred If failed to connect to the ECU while running ActiveTest, the
5 [Start] button
6 [Stop] button
7 [<<] button
8 [>>] button
9 When this screen is displayed
Figure 9 Active Test Screen
There are 8 Data Items in one page, and you can scroll
page to display all test items by clicking '<<' and '>>'
buttons.
Display Active Test image.
Display operational information.
-'Ready'- Active Test has not been done.
-'Finish'- Active Test has already been done.
-'Running...' or 'XXX Sec' -Active Test is running now.
message 7 will be shown and Active Test state becomes
'Ready'.
Start Active Test.
Stop Active Test.
Move to previous page.
Move to next page.
When the ECU is not connected, the ECU connectionwill be
started. If failed to connect to the ECU, themessage 7 will be
shown.
35