Inner Crankshaft Cover - Ossa TR280i Workshop Manual

ENGINE PARTS

8- INNER CRANKSHAFT COVER

Once the stator and rotor are out, the inner crankshaft cover can be removed. It is held toghether with
the crankshaft by 6 bolts. It is necessary to use the extractor kit which is part of the Ossa workshop
toolkit (ref. 1499960211). After this step, the crankshaft can be accessed.
After unscrewing the 6 bolts we attatch the extractor tool at the centre of the inner crankshaft cover
and we pull it out using the extractor that fits in the crankcase, while we screw the bolt in the middle.
14