Transfer Setting
This dialog is used to set the transfer.
1
Transfer Type combo box
2
RS232C Port Number combo box
3
[OK] button
4
[Cancel] button
46
Figure 18 Transfer Setting Dialog
Set the transfer type. You can select the transfer
type only 'RS232C' in this version.
Set the COM port. It is possible to select COM port
from 'COM1' - 'COM10'and 'Auto'. If 'Auto' is selec
ted, COM port is searchedfrom 'COM1' to 'COM10'
when the Back button is clicked.
Check ECU connection. If succeeded to connect to
the ECU, close this dialog. If failed to connect to the
ECU,the Message 13 will be shown.
Cancel settings and close this dialog.
ELECTRICAL PARTS