Ossa TR280i Workshop Manual page 53

KSCAN
10 The ECU returned invalid code.
Please reset the ECU.
11 Push the stop button, and try again.
12 This version does not
support this language.
13 Cannot connect to the ECU!
14 Would you like to clear
all historic errors?
15 Cannot clear historic errors.
16 The recording error occurred.
17 The recording was finished.
18 Cannot open the recording file.
19 Have you set a throttle butterfly
to the metal touch position?
Is the range of the current voltage normal?
20 Setting is succeeded.
21 TPS voltage is out of range.
22 TPS Sensor Error.
23 TPS Sensor Power Error.
24 Engine is running.
25 Out of Battery.
26 There is no software in the ECU.
27 Unexpected error occurred.
28 This function is not supported by the ECU. OK
OK Diagnosis When the ECU returned invalid
code.
OK Graph View
Active Test Running button to Switch Screen
Data Recording
OK The language
OK The transfer
YESNO Diagnosis
OK Diagnosis The application failed to clear
the 'Historic Error'.
OK Data Recording
OK Data Recording
OK Data Recording
YESNO Throttle Setting
OK Throttle Setting
OK Throttle Setting
OK Throttle Setting
OK Throttle Setting
OK Throttle Setting
OK Throttle Setting
OK Throttle Setting
OK Throttle Setting
Throttle Setting
Operating time
When you click the
while each process of
Screens is running.
When you select except
English.
The application cannot
connect to the ECU with
the setting when you
click the back button.
When you click the
History Clear button.
The application failed to
record data.
The recording was
finished normally.
The application cannot
open the recording file.
When you click the Set
to ECUbutton.
When the ECU returned
normal code.
When the ECU returned
this error code.
When the ECU returned
this error code.
When the ECU returned
this error code.
When the ECU returned
this error code.
When the ECU returned
this error code.
When the ECU returned
this error code.
When the ECU returned
this error code.
When the ECU returned
this error code.
53