Select Data Items; Select Data Items Dialog - Ossa TR280i Workshop Manual

1 Engine Temperature
2 Engine Speed
3 Intake Air Temperature
4 Selected Data Item
5 [Toolbar] View Setting button
6 [Toolbar] Print button
7 [Toolbar] Unit Switch button
8 When this screen is displayed

SELECT DATA ITEMS

This dialog is to select 8 Data Items.
1 CH0 - CH7 combo box
2 [OK] button
3 [Cancel] button
30
Display Data Item Engine Temperature by meter and value.
Display Data Item Engine Speed by meter and value.
Display Data Item Intake Air Temperature by meter and value.
Display selected Data Item by value.
Show Select Data Item dialog to select 8 Data Items.
Print a screen image.
Switch unit mode.
When the ECU is not connected, the ECU connection will be
started. If failed to connect to the ECU, the message 7 will
be shown(See - Message List).
Figure 4 Select Data Items Dialog
Select a Data Item from list. The list is created when this dialog is
created.
Save selection of Data Items and close this dialog.
Cancel selection of Data Items and close this dialog.
ELECTRICAL PARTS