Table of Contents
Advertisement
General Features
Automatic Configuration
Description
The system sends the VPS data which contains the extension number configuration
information and the VPS automatically creates mailboxes with this data (Quick Setup). Time
and date information is also sent to the Voice Processing System (VPS), so that the VPS and
PBX have the same time and date.
Conditions
• Automatic Configuration should be executed:
1) after extension numbers have been set ([003] Extension Number Set)
2) after Voice Mail Integration for Digital Proprietary Telephones has been set ([126] Voice
Mail Number Assignment)
3) after the time has been set ([000] Date and Time Set)
The order of 1) 2) 3) does not matter.
• Automatic Configuration can be executed from the VPS using DIP-switch initialisation or
Personal Computer (PC) with VT100 emulation software.
(When you execute using PC with VT100 emulation software and choose the type of PBX,
select the "KX-TD612" if it is on the list. If not, select the "KX-TD816/KX-TD1232"
instead.)
• The data is transmitted to the VPS on the lowest jack port.
• If 2 or more lines are connected with the VPS, the port(s) with lower number(s) on the
system need to be connected to one(s) with lower number(s) on the VPS.
<Example>
Correct Way
#6
#5
DSHS
Programming Guide References
No programming required.
Features Guide References
• Voice Mail Integration for Digital Proprietary Telephones
Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone capable Panasonic Voice
*1
Processing System (one that supports digital proprietary telephone integration).
18
*1
#2
#1
VPS
DSHS
Incorrect Way
#2
#6
#1
#5
VPS
Features Guide
Advertisement
Table of Contents
