Assigning Your Telephone Numbers For Remote Automatic Log-In And Toll Saver - Panasonic KX-TVM50 Manual

5.17 Assigning Your Telephone Numbers for Remote Automatic Log-in and Toll Saver

5.17 Assigning Your
Telephone Numbers for
Remote Automatic Log-in
and Toll Saver
When logging in to your mailbox remotely
(i.e., from an outside telephone) to listen to
your messages, the Remote Automatic
Log-in (see 3.4 Remote Access) and Toll
Saver features identify you by recognising
your telephone number. In order to use
these features, you must first store the
telephone numbers that you will use to
access your mailbox remotely.
Automatic Log-in and Toll Saver are not
available with certain PBXs and may be
disabled by the System Administrator for
your mailbox.
1. Log in to your mailbox.
• See 2.1 Logging in to Your Mailbox
if necessary.
2.
3 7
3. to change telephone number 1.
1
to change telephone number 2.
2
• If you have already set a telephone
number and wish to change it, press
[1] after selecting telephone number
1 or 2.
4. Enter your outside telephone number
(20 digits max.) including area code if
needed.
5. to accept.
2
6. Go on-hook.
Note
• In order for Remote Automatic
Log-in and Toll Saver to function
properly, your PBX must be able to
receive Caller ID information. For
more information, consult your
System Administrator.
• Remote Automatic Log-in and Toll
Saver are only available with
Panasonic KX-T series PBXs using
APT or DPT Integration. For more
48 Subscriber's Manual
information, consult your System
Administrator.
• The System Administrator must
enable Automatic Log-in and Toll
Saver for your mailbox before it can
be used.
Document Version 3.0 2010/07