Remove The Installed Processor; Installing A Processor With An Active Fan Heatsink - Intel cc820 Product Manual

Intel Desktop Board CC820 Product Guide
Figure 12. Installing a Processor with an Active Fan Heatsink

Remove the Installed Processor

To remove the processor, follow these instructions:
1. Observe the precautions in "Before You Begin" (see Page 21).
2. Turn off all peripheral devices connected to the computer. Turn off the computer. Disconnect
the desktop board's power cord from the AC power source (wall outlet or power adapter).
3. Remove the computer cover.
4. If the processor has an active fan heatsink, disconnect the processor fan cable.
5. Pull the processor straight up out of the processor connector.
32
A
B
C
J2M1
E
D
OM08683