Zoom R16 Operation Manual page 44

Recorder: interface: controller
Hide thumbs Also See for R16:
Table of Contents

Advertisement

R16 effect types and parameters 7
0~10
Tone
EFX Level
0~100
Dry Level
0~100
ISO/MIC MODEL module
Type
Xover Lo
Xover Hi
Isolator
Divides the signal into three frequency bands and allows individual adjustment of the mixing ratio for each band.
Mic Type
Mic Modeling
Changes the character of the built-in microphones.
Parameter descriptions
Parameter
Setting range
name
50Hz~16kHz
Xover Lo
Xover Hi
50Hz~16kHz
Mix High
Off, −24~6
Mix Mid
Off, −24~6
Mix Low
Off, −24~6
SM57
MD421
Mic Type
U87
C414
3BAND EQ module
Type
3Band EQ
For an explanation of types and parameters, see CLEAN, DISTORTION, ACO/BASS SIM algorithms.
MOD/DELAY module
Type
Depth
Chorus
Mixes a variable pitch-shifted component with the original sound, resulting in full-bodied resonating tone.
Depth
Flanger
Produces a resonating and strongly undulating sound.
Rate
Phaser
Produces a swooshing sound.
Depth
Tremolo
Periodically varies the volume level.
Width
Auto Pan
Shifts the panning position of the sound between left and right.
Shift
Pitch
This effect shifts the pitch up or down.
Ring
For an explanation of types and parameters, see CLEAN, DISTORTION, ACO/BASS SIM algorithms.
Modulator
Time
Delay
Delay effect with a maximum setting of 2000 ms.
Time
Echo
Warm delay effect with a maximum setting of 2000 ms.
Time
Doubling
Doubling effect which creates body by adding a short delay.
Rise1
Dimension
Effect producing spatial expansion.
Depth
Freq Offset
Rate
Resonance
Resonance filter with LFO.
Parameter descriptions
Parameter
Setting range
name
Depth
0~100
Resonance
−10~10
Color
4Stage ,8Stage, Invert4, Invert8
LFO Shift
0~180
Width
0~10
85
Adjusts tonal quality.
Adjusts effect sound level.
Adjusts original sound level.
Parameters/Descriptions
Mix High
Mix Mid
Description
Adjusts low-to-mid crossover frequency.
Adjusts mid-to-high crossover frequency.
Adjusts high range mix level.
Adjusts mid range mix level.
Adjusts low range mix level.
Simulation of SM57 mic suitable for recording of various analog
instruments as well as guitars.
Simulation of MD421 professional standard mic indispensable for
broadcasting, recording and live applications
Simulation of U87, a standard condenser type microphone used in
studios worldwide.
Simulation of C414, a famous microphone highly trusted in recording
situations.
Parameters/Description
Parameters/Descriptions
Rate
Mix
Rate
Resonance
Color
LFO Shift
Rate
Clip
Rate
Clip
Tone
Fine
Balance
Feedback
Mix
Feedback
Mix
Tone
Mix
Rise2
Filter Type
Resonance
EFX Level
Dry Level
Description
Adjusts modulation depth.
Adjusts resonance intensity. Negative values result in reversed phase
for the effect sound.
Selects sound type.
Adjusts left/right phase shift.
Adjusts auto pan width.
R16 effect types and parameters 8
Rate
Clip
Shift
Time
Mix Low
Feedback
Mix
Tone
Fine
Balance
Rise1
Rise2
Freq Offset
Filter Type
Resonance
EFX Level
Dry Level
ZNR module
Type
ZNR
Parameters marked with
Table 1
The note durations for the setting values are shown below.
Thirty-second note
Sixteenth note
Quarter triplet note
NOTE
• The note range actually available depends on the parameter.
• Depending on the combination of tempo setting and selected note symbol, the parameter setting range could be exceeded. In such a
case, the value is automatically halved (or set to 1/4 if the range is still exceeded).
Table 2
Setting value
Off
Frequency does not change.
Up
Frequency changes from minimum to maximum according to the controlling waveform.
Down
Frequency changes from maximum to minimum according to the controlling waveform.
Hi
Frequency changes from patch setting to maximum according to the controlling waveform.
Lo
Frequency changes from minimum to patch setting according to the controlling waveform.
Table 3
Setting
Description
value
Up Saw
Rising sawtooth wave
Up Fin
Rising fin wave
DownSaw Falling sawtooth wave
DownFin
Falling fin wave
Table 5
Setting
value
1
1 semitone lower — original sound
2
Original sound — 1 semitone lower
3
Doubling — detune + original sound
4
Detune + original sound — doubling
5
Original sound — 1 octave higher
6
1 octave higher — original sound
Original sound — 2 octaves lower
7
8
2 octaves lower — original sound
9
1 octave lower + original sound — 1 octave higher + original sound
Adjusts modulation rate. Using the rhythm tempo as reference,
0~50
(P.86 Table 1)
setting in note units is also possible.
0~10
Adds emphasis by clipping the modulation waveform.
For an explanation of types and parameters, see CLEAN, DISTOR-
−12~12,24
TION, ACO/BASS SIM algorithms.
Delay, Echo: 1~2000ms
(P.86 Table 1)
Adjusts delay time.
Doubling: 1~100ms
0~100
Adjusts feedback amount.
0~100
Adjusts mix ratio of effect sound to original sound.
0~10
Adjusts tonal quality.
−25~25
Adjust pitch shift amount in cent (1/100 semitone) units.
0~100
Adjust balance between original sound and effect sound.
0~30
Adjusts stereo component intensity.
0~30
Adjusts mono component intensity.
1~30
Adjusts LFO offset.
HPF, LPF, BPF
Selects filter type.
1~30
Adjusts resonance intensity.
0~100
Adjusts effect sound level.
0~100
Adjusts original sound level.
Parameters/Description
For an explanation of types and parameters, see CLEAN, DISTORTION, ACO/BASS SIM algorithms.
allow selection of a setting value in note units, using the song/pattern tempo as reference.
Dotted sixteenth note
Dotted eighth note
Eighth note
Quarter note
Half triplet note
Dotted quarter note
Description
Table 4
Setting
Setting
Description
value
value
Tri
Triangular wave
TrixTri
Squared triangular wave
Sine
Sine wave
Square
Square wave
Setting
Description
value
10
1 octave higher + original sound — 1 octave lower + original sound
Complete fifth down + original sound — complete
11
fourth up + original sound
Complete fourth up + original sound — complete fifth
12
down + original sound
13
0 Hz + original sound — 1 octave up
1 octave up — 0 Hz + original sound
14
15
0 Hz + original sound — 1 octave up + original sound
16
1 octave up + original sound — 0 Hz + original sound
Quarter note x 2
:
:
Quarter note x 20
Setting
Description
Description
value
Eighth note
1 bar
1 measure
Quarter note
2 bars
2 measures
Half note
3 bars
3 measures
Dotted half note
4 bars
4 measures
Description
86

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents