Zoom R16 Operation Manual page 26

Effect
Insert effect insertion position
You can change the insert position of the Insert Effect.
This menu is only for Insert Effect.
1
Press [INSERT EFFECT].
Effect on/off switch.
If "INSERT EFFECT Off" is displayed,
press [ENTER].
2
Select the algorithm/patch.
Change
algorithm
Current insert position
C L E A N < I N 1 >
N o . 0 0 : S t a n d a r d
Change
IN** Inserted in INPUT **
IN**/** Inserted in INPUTS ** and **
Inserted in TRACK **
TR**
TR**/** Inserted in TRACKS ** and **
IN*~** Inserted in INPUTS * to **
TR*~** Inserted in TRACKS * to **
Inserted in the master track
MASTER
3
Press[ ].
NOTE
• You can select a single INPUT (1~8) only when
you have chosen the CLEAN, DISTORTION,
ACO/BASS SIM, BASS or MIC algorithm.
• You can select Track 1-8 or Track 9-16 only when
the 8 x COMP EQ is chosen as the algorithm.
• INPUT 1-8 can be selected only when the 8 x
COMP EQ algorithm has been chosen.
• After you select an insertion place, if you change
the algorithm to 8 x COMP EQ, the insertion place
will be changed to Input 1-8, Track 1-8 or Track
9-16 (depending on the previous setting).
• To insert into a single monaural track output, you
must select TRACK 1 ~ TRACK 8. To insert into
a two monaural tracks or a stereo track, you must
select TRACK 1/2 ~ TRACK 15/16. If you want
to insert before the MASTER FADER, you must
select MASTER.
49
4
Select >INPUT SOURCE
N o . 0 0 : S t a n d a r d
> I N P U T S O U R C E
Press [ENTER].
I n p u t S o u r c e
I N P U T 1
5
Set source of input into effect.
I n p u t S o u r c e
I N P U T 8
I n p u t S o u r c e
T R A C K 8
patch
Press [ENTER].
On display Insert place
Input Mixer input
Input1~Input8 Single mixer input
Output from either monaural track
Track1,Track2
1 or 2
Track1/2, Output from either stereo track or 2
Track3/4 monaural tracks
Master Just before the [MASTER] fader
With 8 x Comp EQ setting case
Track1-8 All track 1–8 outputs
Track9-16 All track 9–16 outputs
6
Press[ ].
Current insert position
C L E A N < T R 8 >
N o . 0 0 : S t a n d a r d
HINT
Change the insertion place of the insert effect.
When a project is at the default status, the insert
effect is inserted on INPUT 1.
To change this place, select an INPUT SOURCE at
Step 4:
.
Insert position of insert effect
Inserting the INSERT EFFECT into 2 monaural inputs
(DUAL algorithm)
Change
menu
Change
input place
Change
Inserting an INSERT EFFECT into a stereo input
input place
(Stereo Master algorithm)
Inserting an INSERT EFFECT on 8 inputs
(8 x COMP EQ algorithm)
50