Zoom R16 Operation Manual page 29

Effect
Using the insert effect only for monitoring
By applying an insert effect only to monitoring, unaffected input signals can be recorded to tracks.
1
Press [INSERT EFFECT].
Effect ON/OFF switch
When "INSERT EFFECT Off" is displayed,
press [ENTER].
2
Select the Algorithm/Patch.
Change
C L E A N
algorithm
N o . 1 5 : S t a n d a r d E
Change patch
3
Press [ ].
Using the insert effect only
for monitoring
By default, when an insert effect is
applied to an input signal, the signal
with the effect is recorded to the track.
However, when desired, you can apply
the insert effect only to the monitoring
outputs and record the non-processed
input signal on the track.
For example, you can apply an insert
effect to a microphone, to make a vocalist
feel more comfortable singing, but still
record the vocal without the effect.
55
4
Select >REC SIGNAL .
N o . 0 0 : S t a n d a r d
> R E C S I G N A L
Press [ENTER].
5
Select DRY .
Change setting
R E C S I G N A L
D r y
Press [ENTER].
The input signal will be recorded
WET
to the track after it passes through
(Default value)
the insert effect.
The input signal will be recorded
t o t h e t r a c k b e f o r e p a s s i n g
through the insert effect. However,
DRY
the input signal monitored from the
OUTPUT and PHONES jacks will
pass through the insert effect first.
HINT
• The settings made here will be stored project by
project.
• If necessary, restore the initial "Wet" setting before
recording other parts.
Project
Project overview & project protection
A project stores data and elements necessary for music playback. The "PROTECT" function allows you
to prevent the alteration of a completed project.
All elements of a piece of music are stored
in a project as one unit, including audio files,
information about track assignments, and
mixer, effect, metronome and tuner settings.
The unit can handle a maximum of 1000
projects on a single card. Create a new project
for each new piece of music.
Data saved in a project:
Audio data for every track including the
*
MASTER track
Folder settings selected by tracks
*
Mixer settings
*
Patch numbers and patch contents set for
*
insert and send return effects
Contents of play lists
*
All other necessary files
*
Protecting a project
PROJECT>EDIT>PROTECT
1
Press [PROJECT].
2
Select >EDIT .
Change
P R O J E C T menu
> E D I T
Press [ENTER].
3
Select >PROTECT .
Change
P R O J E C T E D I T menu
> P R O T E C T
Press [ENTER].
4
Select >ON .
P R O J E C T P R O T E C T
O n
Turn ON/OFF
Press [ENTER].
NOTE
• You can play back a project when it is protected,
but you cannot change it. If you want to record in
it or edit it again, set "PROTECT" to "Off."
• Projects that are not protected will be automatically
saved to the SD card when you turn the POWER
switch OFF or when you open another project.
• We strongly recommend setting "PROTECT" to
"On" once you complete a piece of music to avoid
saving a mistaken operation later.
HINT
• The lock icon appears on
the screen when a project
is protected.
56