Zoom R16 Operation Manual page 27

Effect
Insert effect
: Patch editing
Send return effect
You can create patches that combine effects together, change effect types in patches, or change
processing however you like by adjusting the depth of effects using their parameters.
Press [INSERT
or
EFFECT] or
[SEND RETURN
EFFECT].
1
Effect on/off switch.
If "INSERT EFFECT Off" is
displayed, press [ENTER].
2
Select the algorithm/patch.
Change
C L E A N < I N 1 > algorithm
N o . 1 5 : S t a n d a r d E
3
Press [ ].
Change
4
Select >EDIT .
Change
N o . 1 5 : S t a n d a r d
> E D I T E
Press [ENTER].
HINT
• Some patches say "Empty," because no modules
in the patch have been set yet.
• When you want to edit the ZNR module, go to the
page with "TOTAL" in the first row.
• You can individually edit the modules arranged in
the L/R Channels of the DUAL MIC ALGORITHM.
Your selection is the left channel when the first
row displays "L" and the right channel when the
first row displays "R."
• In the 8 x COMP EQ ALGORITHM, each channel
has its own HPF, COMPRESSOR and EQ
modules and you can turn each effect module on/
off on each channel independently. You can check
the current channel by looking at the number in
the first row of the display.
51
Edit effect modules
5
Turn the effect types on/off.
Effect module off
C o m p r e s s o r
O f f
Press [ENTER] to switch.
Type (effect module) ON
C O M P / L I M I T E R
C o m p r e s s o r
Effect type Shown after you edit or change
Set the effect module
patch
6
Select the effect module.
item
C O M P / L I M I T E R E
C o m p r e s s o r
M O D / D E L A Y E
C h o r u s
Effect type
Edit the patch level
(final patch sound volume)
7
Set the patch level.
T O T A L
P a t c h L e v e l = 2 5
8
Press [EXIT] to return.
Adjust the effect parameters
1
Select a parameter.
E n s e m b l e
D e p t h = 2
2
Set the value.
E n s e m b l e
D e p t h = 2
E
E: Edit mark
3
Press [EXIT] to return.
Change module
NOTE
• You cannot edit an algorithm itself, including
the combination and arrangement of the effect
modules.
• If you turn "off" an effect module, all the settings
after the effect module, such as the type and
parameters will also be turned off.
• When you are using 8 x COMP EQ, you cannot
turn an effect on or off for all channels at once.
But if you press [ENTER] when an effect setting
value is displayed for the desired channel, you
can switch it off for that channel.
• You cannot turn off the "TOTAL" modules.
• There is no ZNR module in the 8 x COMP EQ
algorithm.
Change module
• If you change to another patch without saving a
patch that shows the 'E' mark, your edits will be
lost completely. Please refer to the next page for
patch saving.
Change
value
Change INSERT EFFECT name
1
Select TOTAL .
E
T O T A L
P a t c h L e v e 1 = 2 5
Change
parameters
2
Press [ ] until you see
E
PATCH NAME.
Press[ ].
P a t c h N a m e
Change S t a n d a r d
value
Blinks
Change name
3
Press [EXIT] to finish.
Change SEND RETURN EFFECT name
1
Press [ ] until you see
PATCH NAME.
Press[ ].
P a t c h N a m e
S t a n d a r d
Blinks
Change name
2
Press [EXIT] to finish.
Change module
Change
value
52