Dish Network 196812 User Manual page 95

Standard-Definition Connections
1
1
L
or
R
Connect receiver
Connect receiver
and TV with
or and TV with
RCA Composite
Coax cable
connections
Connect the receiver to the TV using one of the following connections.
1
Note: Connecting your TV directly to the audio/video outputs of your receiver will assure a
more vivid picture and enhance your viewing enjoyment.
• connection (RCA-type composite connection)
A /V
UDIO IDEO
• and L
S-V
IDEO EFT
•
TV S O
ET UT
If using the TV S
2
O
ET UT
close to where it connects to the TV S
sticker is in the front cover of this guide.
Turn on the TV and receiver to make sure you have a picture.
3
• If using the TV S
ET
This output channel can be changed in the receiver's menus by pressing MENU on
the remote control, selecting System Setup, Installation, then Modulator Setup.
The default output is channel 3.
• If using the S-V
IDEO
input or source. Refer to your TV's user guide for more information.
Turn up the volume on the TV to make sure you have audio.
4
TV SET
or
S VIDEO
Connect receiver
or
and TV with
S-Video cable
and audio cables
/R A
IGHT UDIO
connection, peel off the white sticker and attach it to the cable
connection on the back of the receiver. The
O
ET UT
connection, you'll need to set your TV to either channel 3 or 4.
O
UT
or A connections, you'll need to set your TV to a video
/V
UDIO IDEO
Connections and Setup
Connecting to the TV
2
3
Confirm sound
TV SET TV SET
and volume
Turn on TV
Label cable
and receiver on
and confirm picture
4
85