R Eceiver C Ontrol - Dish Network 196812 User Manual

Chapter 9
Improving Receiver Control
I
MPROVING
These instructions help you improve your remote control settings to best operate your dish
antenna.
Making the Remote Work with the Receiver
These instructions configure your remote.
Turn your receiver
and TV on, and press
SYSTEM INFO on the
front of the receiver
Turn your receiver and TV on, and press SYSTEM INFO on the front of the receiver.
1
Confirm that you see the System Info screen.
2
Press RECORD on your remote. The receiver then matches the remote's address.
3
4 Confirm that your remote operates your receiver by pressing remote buttons. If this is not
working, go back to step 3.
Changing the Remote Control Address
Because UHF signals travel long distances and go through walls, a neighbor's remote
may control your receiver by mistake. To prevent this, you can change the remote
address.
52
R C
ECEIVER ONTROL
Confirm that
you see the
System Info screen
1
Press RECORD.
The receiver then
matches the
Confirm that your
remote's address
remote operates your
receiver by pressing
remote buttons