Fit Pin in Slot
Tighten
Handle
Limit
Switches
Release the red handle and open the gate to a distance
desired. Loosen the screw. Turn plastic part until the half
moon shape hits the limit switch. For closing cycle, do the
same with the other plastic part.
Tighten the Nut
Pull the short arm away from the gate.
NO
slippage should occur.
If it does, go back and tighten the nut more.
Adjustments
Loosen
Set Allen Screw
Screw
For a more precise adjustment, you may use the
set allen screw.
Red handle
must be in
90°
this position
Pull