Konftel 300IP Installation Manual page 51

PROVISIONING – UPGRADE AND CONFIGURATION
Local configuration file
The local configuration file contains configuration parameters that are unique for every
conference phone. The settings in this file takes precedence over the settings in the global
configuration file.
The default name for this file is kt300ip-<MAC>.xml, where <MAC> is the MAC address of
the specific conference phone. The MAC address should be written without colons.
It is possible to create a custom name by using the pagename element in the configura-
tion file. It is also possible to refer to a cgi, php, asp, js or jsp file, instead of the xml file,
if this is declared using the type element in the configuration file.
Konftel 300IP searches for configuration files in the following order:
"
%"%
4
5 E
E %
:
=
Firmware binary
Contains the firmware binary that will be downloaded and installed by Konftel 300IP if the
metadata file shows that this is a newer version than the present installed. The binary file
can be downloaded from www.konftel.com/upgrades.
Firmware metadata file
A metadata file in xml format with information of the firmware version in the binary file.
The file is used to check if the binary file should be downloaded to the phone or not.
The name of this file shall be kt300ip_fw_version.xml. The file shall contain the following
elements in xml format.
<firmware_version>
<version>X.X.X </version>
<filename>xxxx </filename> Eg. KT300IP_v2.0.3.kt
<checksum>XXXX </checksum> MD5 checksum of the firmware binary
</firmware_version>
Eg. 2.0.3
49