Konftel 300IP Installation Manual page 24

SETTINGS
Require client certificate
Verify server
Certificate
Root certificate
Private key
Private key password The password used for encryption of the private key, if it is
When set to On, the Konftel 300IP rejects incoming secure SIP
connections (TLS or SIPS) if the client does not have a valid
certificate.
When the Konftel 300IP is acting as a client (outgoing connec-
tions) using secure SIP (TLS or SIPS) it will always receive a
certificate from the peer. If Verify server is set to On, the Konftel
300IP closes the connection if the server certificate is not valid.
Here you can upload a certificate to the Konftel 300IP to be used
for TLS or SIPS communication.
A certificate is a file that combines a public key with information
about the owner of the public key, all signed by a trusted third
party. If you trust the third party, then you can be sure that the
public key belongs to the person/organization named in that file.
You can also be sure that everything you decrypt with that public
key is encrypted by the person/organization named in the certifi-
cate.
The public key in the root certificate is used to verify other certifi-
cates. A root certificate is only needed if you have selected client
or server verification.
A root certificate is signed by the same public key that is in the
certificate, a so-called "self-signed" certificate. A typical root
certificate is one received from a Certificate Authority.
Here you can upload a private key to the Konftel 300IP to be used
for TLS or SIPS communication.
A private key is one of the keys in a key-pair used in asymmetric
cryptography. Messages encrypted using the public key can only be
decrypted using the private key.
encrypted.
22