Provisioning - Konftel 300IP Installation Manual

Hide thumbs Also See for 300IP:
Table of Contents

Advertisement

SETTINGS
NTP Server
On phone: MENU > SETTINGS > ADVANCED > (PIN) > TIME (6,2,5).
Region
Select the region where you are. This setting determines the signalling (disconnect tone,
busy tone, etc).
On phone: MENU > SETTINGS > ADVANCED > (PIN) > REGION (6,2,6).
Daylight saving
Enable DST
DST Timezone
DST Mode
Start/Stop fixed date Set to Yes if DST changes the same date every year in your coun-

PROVISIONING

See "PROVISIONING – UPGRADE AND CONFIGURATION" on page 40.
setting only adjusts the time by one hour and does not change the
time automatically when the DST starts and ends.
The NTP pool is a dynamic collection of networked computers that
volunteer to provide highly accurate time via NTP to clients world-
wide. These computers are part of the pool.ntp.org domain and
part of several subdomains divided by geographical zones. They are
distributed to NTP clients via round robin DNS.
Select the Yes radio button if DST (Daylight Saving Time or
Summer Time) is used in your country.
Select the offset from UTC time when daylight saving is in use.
When set to Automatic, OmniTouch 4135 IP uses dates stored
in the phone to adjust for DST. When set to Manual, you need to
manually set the offset two times a year.
try. Then select the time and date it changes.
Set to No if DST changes a specific week and day each eyar. (For
instance third sunday in March.) Then select the month, week and
time it changes.
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents