Using A Configuration File - Konftel 300IP Installation Manual

PROVISIONING – UPGRADE AND CONFIGURATION

USING A CONFIGURATION FILE

It is possible to save a configuration xml file to be used as:
• Backup (i.e. if the system has been reset to factory default)
• Configuration interface (there are some settings that are not configurable via the web
interface)
• Management tool (export, edit and import settings to a set of phones instead of doing
the settings on each phone)
• Use with a Device Management server, see page 48.
The structure of the xml file is as follows:
<locale>
<region>
<recording>
<enable>
<logging>
<level>
<log_sip>
<remote_log>
<remote_host />
<network>
<net>
<dhcp>
<ip>
<netmask>
<gateway>
<dns>
<dns>
<hostname>
<domain />
<vlan>
<enable>
<id>
<std_prio_map>
<sip_priority>
<media_priority>
<ether_8021x>
The phone application logs messages to log facility LOCAL0.
Log level 1–5 (equivalent to Fatal–Trace)
Log SIP messages to log facility LOCAL1. Default is true.
Log messages to a remote log server. Default is false.
Remote log server.
Specify if DHCP should be used to obtain network settings. If so, the other
network settings won't be used.
Specify the IP address of the KT300IP.
The netmask of the IP address.
Specify the default gateway to be used.
Specify at most two Domain Name Servers to be used.
Specify host name.
Specify domain name.
Virtual LAN enabled if set to true
VLAN ID.
42