Adjustments; Maintenance Modes And Their Functions; User Maintenance Mode - Oki OKIPAGE8c Maintenance Manual

4.

ADJUSTMENTS

Adjustments are carried out by key operations on the operator panel, by software operation panel,
and by EEPROM of PU (PXS-PCB) setting.
This page printer supports three maintenance modes. Select and set a maintenance mode fit for
the adjustment.
4.1

Maintenance Modes and Their Functions

4.1.1

User maintenance mode

To set the user maintenance mode, turn on the power switch of the page printer while pressing on
the MENU key.
• Functions
- Menu reset
- Drum counter reset
(YELLOW, MAGENTA, CYAN, BLACK)
- Belt count reset
- Resource save area
- Operator panel menu disable
- Y adjust
- SETTING
(a) Menu reset
1 Resets all Menu Level 1 settings to the default settings (which have been factory-set).
2 Resets all executable Emulation menu items (including options) to factory-set default
emulation items.
(b) Hex dump
1 Receives data from the host computer and dumps it in a hexadecimal format.
2 When one page of data or more comes from the host, printing automatically starts.
To print out data of less than one page, press the ONLINE key to set the offline state
and press the EJECT key. Printing starts.
3 To exit this mode, shut off power to the page printer.
(This is the only one way to exit this mode.)
(c) Drum counter reset (for yellow, magenta, cyan and black)
1 Used to reset the drum life after the EP drum is replaced.
2 After drum-counter resetting is made, the page printer does not enter the operation
mode automatically.
- Hex dump
- FUSER COUNT RESET
- Oil roller count reset
- Receive buffer size
- X adjust
- Darkness
(YELLOW, MAGENTA, CYAN, BLACK)
- Color Reg Adjust Execute
4 - 1