Oki OKIPAGE8c Maintenance Manual page 139

7
Cannot Receive Data from Parallel Interface.
• Is "PARALLEL I/F" (in menu 1) set to "ENABLE"?
No Set the "PARALLEL I/F" (in menu 1) to "ENABLE."
• Yes Is Parallel interface of the host computer set to "Bidirectional Communication"?
Yes Set the "Bidirectional Communication" of "Parallel Interface" (in menu 2) to "ENABLE."
• No Set the "Bidirectional Communication" of "Parallel Interface" (in menu 2) to "DISABLE."
• Is Data printed out?
Yes End
• No Is Parallel interface cable connected correctly?
No Connect the cable correctly.
• Yes Check the connection of the parallel interface cable (for wire disconnections or bent pins).
Is it recovered?
No Replace the parallel interface cable.
• Yes Replace the main board (PCR PCB) or check hardware and software of the host computer.
6 - 26