Table of Contents
Advertisement
3
Align the Diopter Ring with the
Engraved Base Line
Turn the diopter ring on the right eyepiece to align
its bottom edge with the engraved base line. Turn
and align the diopter ring on the left eyepiece in
the same way.
4
Specimen Mounting
Place specimen slide on the stage with the
coverglass facing upward. Open the claw of the
specimen holder with your finger at the root or the
tip tilt and fix the specimen slide with the claw.
5
Focus with the 10x Objective
Rotate the revolving nosepiece to bring the 10x
objective into the optical path. (The objective will
click into place when rotated into position.)
Bring the specimen image into focus by turning the
coarse focus and then fine focus knob.
• Direction of stage movement relative to focus
knob rotation is shown in the figure.
• There is no coarse focus knob on the side with
the stage motion knobs. There are both coarse
and fine focus knobs on the opposite side of the
stage motion knobs.
• Do not turn the right and left focus knobs
simultaneously in the opposite directions. Do not
turn the coarse focus knob further after the stage
has reached its lower or upper limit. These
operations could result in a malfunction.
Chapter 4 Microscopy (Detailed Procedure)
55
Match the bottom edge
of the diopter ring with
the engraved base line.
Coverglass
Click.
4
Hide quick links:
Advertisement
Table of Contents
