Tv/Radio List; Favorite List; Epg - SMART MX56 Manual

channel.(The selected audio language information is saved and applied when you
watch the channel.)
-TV/RADIO : Changes the current mode.
-Numeric Key(0-9) : You can change channel by input
the channel number directly.
-Up/Down : Move to the previous/next channel.
-MENU : You can enter the Main Menu.
-OK : You can select an item in the SAT,SUBTITLE or LANG list. Program list is
displayed according to TV/Radio Mode.
-EXIT : The button makes a banner or other lists including SAT,SUBTITLE and
LANG disappeared.
-PAUSE: Shows the video/audio output of receiver, To clear pause press PAUSE
button again.
-INFO : If you press the INFO button once, a banner is displayed on the upper part of
the screen, and if you press the button again before the upper banner is disappeared,
the banner will show the details of the currents channel.
-FAV : The Favorite List is displayed.
-EPG : The EPG menu of the current TP is displayed.

6.2 TV/Radio List

If you press TV/RADIO/OK key on the remote
controller, at No menu state, the screen is displayed as
follows (Fig 6.2).
You can preview the channel and move the channel with the
Fig6.1
Fig6.2
UP/DOWN button

6.3 Favorite List

If you press FAV on the remote controller at No
menu state, the screen is displayed as follows (Fig 6.3).
You can preview the channel and move the channel with
the UP/DOWN button.

6.4 EPG

EPG shows the event information of the current
channel by time zone.
EPG is divided into Weekly mode, Daily mode, and
Extend mode, and provides timer based recording and
automatic power that have EPG information.
If you press EPG key, the Weekly mode is displayed as the default mode.
Move the cursor to an event in the required time zone,
and press RED key. Then the timer is set to the
designated time. See 4.7 Timer Setting for detail
Fig6.3
Fig6.4
Fig6.5