Safety - SMART MX56 Manual

This STB has been manufactured to satisfy the international safety standards.
Please read the following safety precautions carefully.
MAIN SUPPLY
:AC 100/240V, 50/60Hz, 30W.
OVERLOADING
:Do not overload a wall outlet, extension cord or adapter as this may result
in fire or electric shock.
LIQUIDS
:This STB shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the STB.
CLEANING
:Disconnect the STB from the main supply before cleaning. Do not use any
kind of solvents to clean the STB, only use a soft-dry cloth.
VENTILATION
:The slots on top of the STB must be left uncovered to allow proper airflow to
the unit.
Do not stand the STB on soft furnishings or carpets.
Do not expose the STB to direct sunlight or do not place it near a heater.
Do not stack electronic equipments on top of the STB.
ATTACHMENTS
:Do not use any unrecommended attachments as these may cause
hazard or damage the STB.
CONNECTION TO THE TERRESTRIAL ANTENNA
:Disconnect the STB from the main supply before connecting or
disconnecting the cable from the terrestrial antenna.
FAILURE TO DO SO CAN DAMAGE THEANTENNA.
CONNECTION TO THE TV
:Disconnect the STB from the main supply before connecting or
disconnecting the cable from TV.
FAILURE TO DO SO CAN DAMAGE THE TV.
EARTHING
:The antenna cable MUST BE EARTHED to the system earth for the
Terrestrial antenna.
LOCATION
:Place the STB indoor in order not to expose to lightening , rain or
Sunlight.
INTRODUCTION
This manual will help you learn basic functions such as installation, selecting
channels and many other functions of the STB. All functions can be operated by
the remote control. You can easily install it by selecting
software through communication cable.
The remote control is designed for easy access to all the functions at once and for
comfortable grab for your hand. It is programmed to control all functions and to easily
watch TV and Radio programs via the STB.
WARNING
Any problems caused by the use of unofficial software. The use of software
versions other than dealers or distributors official software will void the manufacturer
's warranty. It is advised that only the formal software released from dealers or
distributors should be used.
Installation
function and upgrade its