Timer Setting - SMART MX56 Manual

4.3 Timer Setting

From Scan menu (Fig 4.1), you can select
Timer Setting menu (Fig 4.8). This menu
can set 8 timers to make the receiver perform the
designated actions.
Use the Up/Down button to select the timer. If you press OK to select a
timer, You can see the current setting state of this timer (Fig 4.9).
If you use this timer, please set Timer State
to Enable status. You can see a extended
menu (Fig 4.10).
Use the
Timer Number: You can select up to 8 timers.
Timer Cycle: You can set the cycle of the action
designated in the timer mode. One Time , Every
Day and Every Week
Fig4.8
Timer Service: You can set the timer service mode
( Sleep , Wakeup ,
Date: You can set the starting date of the timer action if you press OK , calendar
action.
Start Time: You can set the starting time of the timer action.
Ending Time: You can set the ending time of recording when the Timer Service
is VCR Record .
Fig4.9
Channel: You can select the program channel to record when the Timer Service
is set to VCR Record .When Timer Service is Wakeup
is viewed by receiver
Up/Down button to select item, and change the parameters Use
Left/Right button. If you have completed the timer settings, use Red or
Blue button to save timer setting.
VCR Record ). Fig4.10
, this channel