Parts Name Of Remote Controller; Operation Of Remote Control - Toshiba RAS-25E2KVG-ND Service Manual

9-4. Remote control

9-4-1. Parts Name of Remote Controller

1 Infrared signal emitter
2 Start/Stop button (
3 Mode select button (
4 Temperature button (
5 Fan speed button (
FAN
6 Swing louver button (
SWING
7 Set louver button ( )
FIX
8 8°C Heating Operation (
9 On timer button ( )
! Off timer button ( )
" Setup button ( )
# Clear button ( )
$ Memory and Preset button (
% Silent operation button (
& High power button (
Hi POWER
( Eco button ( )
ECO
) Quiet button ( )
QUIET
~ Comfort sleep button (
+ Filter reset button (FILTER)
, Set clock button (CLOCK)
- Check button (CHECK)
. Reset button (RESET)
Note:
• The provided Remote Controller is a wireless type, which also can be used as a wire.
Please see "How to Connect The Remote Controller for Wired Operation", located in installation instruction,
in case of wired control is required.
• In wire operation, remote controller will return to initial condition (PRESET, TIMER and CLOCK will return
to initial condition) when user shutdown power supply of Air conditioner.

9- 4-2. Operation of remote control

1. AUTOMATIC OPERATION
To automatically select cooling or fan only operation.
1. Press
: Select Auto A.
MODE
: Set the desired temperature. Min 17°C, Max 30°C.
2. Press
3. Press : Select AUTO, LOW , LOW+
FAN
2. COOLING / HEATING / FAN ONLY OPERATION
1. Press
: Select Cool
MODE
2. Press
: Set the desired temperature.
Min 17°C, Max 30°C, Fan Only: No temperature indication
3. Press : Select AUTO, LOW
FAN
3. DRY OPERATION
For dehumidification, a moderate cooling performance is controlled automatically.
1. Press : Select Dry
MODE
2. Press
: Set the desired temperature. Min 17°C, Max 30°C.
Note: Dry mode fan speed is set to Auto only.
)
)
)
)
)
)
8°C
)
)
)
)
, Heat or Fan only
, LOW+
.
$
2
3
7
%
(
8
8°C
9
~
-
,
, MED , MED+ , or HIGH
.
, MED , MED+
, or HIGH
- 47 -
1
4
6
5
SWING FAN
)
FIX QUIET
&
ECO Hi POWER
#
!
"
.
+
.
.