Formatting The Hard Disk - Panasonic WJ-HD500A Operating Instructions Manual

Digital disk recorder
Hide thumbs Also See for WJ-HD500A:
Table of Contents

Advertisement

FORMATTING THE HARD DISK

The Hard Disk requires formatting before it can be used for
storing images, as shown below.
• When the Hard Disk in the Disk Recorder is replaced.
(Disk formatting is required for the replaced Hard Disk.)
• When the optional extension units are operated for the
first time after installation.
(Disk formatting is required for the Hard Disk in the
Extension Unit.)
Notes:
Remember that by formatting the hard disk all previ-
ously recorded data on the disk will be erased.
If the Disk Recorder is set up with the mirroring
function, the replaced Hard Disk is automatically
copying the data from the other disk of the pair after
the disk was formatted.
Copying data will take about two hours for a disk
with a capacity of 30 GB.
Follow the procedures described below to format the Hard
Disk in the unit.
1. Power up the Disk Recorder by pressing the POWER
switch.
2. The Disk Recorder will run through a series of instruc-
tions for the system on the Multiscreen Monitor.
The display as shown below appears on the monitor,
then the DISK MENU shown below will be displayed
after five seconds.
YOU HAVE TO CONFIGURE DISKS
DISK MENU
MAIN
1:
GB
¢¢
EXT5
1:
GB
¢¢
EXT4
1:ADD
EXT3
1:-
EXT2
1:-
EXT1
1:-
EXT0
1:-
EXT DVD:-
REMOVE FORMAT
RESTART
SELECT ITEM AND PRESS [SET] KEY
29
[ SYSTEM CHECK ]
PLEASE WAIT
2:
GB
¢¢
2:
GB
3:
GB
4:
GB
¢¢
¢¢
¢¢
2:ADD
3:ADD
4:ADD
2:-
3:-
4:-
2:-
3:-
4:-
2:-
3:-
4:-
2:-
3:-
4:-
CD:OK
3. Move the cursor to FORMAT in the menu by pressing
the A or B button, then press the SET button.
The FORMAT MENU shown below appears on the mon-
itor screen.
FORMAT MENU
MAIN
1:
GB
2:
¢¢
¢¢
EXT5
1:
GB
2:
¢¢
¢¢
EXT4
1:ADD
2:ADD
EXT3
1:-
2:-
EXT2
1:-
2:-
EXT1
1:-
2:-
EXT0
1:-
2:-
EXT DVD:-
CD:OK
PASSWORDB-----
4. Select the ALL password (5-digit) by pressing the
Numeric buttons (1 - 10).
Refer to the password setup in the SYSTEM SETUP
menu for further details.
The factory default setting is 12345.
• To select "0" for numeric input, press the numeric
10 button.
• Entering an input will automatically check the pass-
word.
If the password is not correct, "PASSWORD
ERROR!" is displayed on the monitor screen and
the display returns to step 2.
To enter the password again, repeat procedures 3
and 4.
• To quit entering the password, press the SETUP/
ESC button.
5. If the password is correct, the instructions shown below
appear in the lower-left corner of the menu.
FORMAT MENU
MAIN
1:
GB
2:
¢¢
¢¢
EXT5
1:
GB
2:
¢¢
¢¢
EXT4
1:ADD
2:ADD
EXT3
1:-
2:-
EXT2
1:-
2:-
EXT1
1:-
2:-
EXT0
1:-
2:-
EXT DVD:-
CD:OK
1DISK
ALL
ALL MIRROR
RESTART
SELECT ITEM AND PRESS [SET] KEY
GB
GB
3:
GB
4:
GB
¢¢
¢¢
3:ADD
4:ADD
3:-
4:-
3:-
4:-
3:-
4:-
3:-
4:-
GB
GB
3:
GB
4:
GB
¢¢
¢¢
3:ADD
4:ADD
3:-
4:-
3:-
4:-
3:-
4:-
3:-
4:-

Advertisement

Table of Contents
loading

Table of Contents