Plug&Clean; Mixer Rinsing; Combi Spout Cleaning; Milk Container Cleaning - WMF 1400 Series User Manual

Plug&clean
Cleaning of the Plug&Clean is in three parts.
• Automatic foamer rinsing for a maximum of 3 minutes
after each beverage with milk or milk foam
• Display-guided milk system rinsing
once per week
• , lay combi spout, milk hose and milk
nozzles in a cleaning solution
5.1.3

Mixer rinsing

Mixer rinsing is a mixer interim cleaning.
Mixer rinsing is an integral part of the cleaning mode.
5.1.4

combi spout cleaning

Thorough cleaning of the milk system. The exact sequence
of this manual cleaning is described in the cleaning
instructions.
5.1.5

Milk container cleaning

Clean the milk container thoroughly every day.
5.1.6

general cleaning

grounds container cleaning (grounds chute, optional)
Empty the coffee grounds container and rinse under
™
running water
Clean with a clean, damp cloth
™
Drip tray, housing and front panel
™ Clean the cold machine using a damp cloth
Wipe dry using a fine woolen cloth or chamois leather
™

cleaning metal surfaces

For cleaning metal housing parts (matte surface), we
recommend WMF Purargan® forte cleaner.
Do not clean with scouring powders or similar.
There is a risk of causing scratches or scores.
Do not use any sharp cleaning materials or implements.
User Manual WMF 1400
Care
Plug&Clean cleaning program
w Cleaning instruction
Mixer rinsing
w Cleaning instruction
Combi spout cleaning
w Cleaning instruction
cautioN
Health hazard.
Follow the hygiene
instructions.
See chapter 6:
HACCP schedule.
Order numbers for the WMF care
program
w Appendix C
Accessories and spare parts
page 69
Switch off the machine before
cleaning the front panel to avoid
a beverage being accidentally
dispensed.
Notice
Follow the instructions
beside.
See chapter 9.4: Warranty.
43