Appendix: Technical data
it may be necessary to also observe additional country-
specific regulations.
The local power supply must be constructed according to NEC. Near the device
or about 12 inch (30 cm) below the counter top there should be a shockproof
socket as a single-phase connection installed locally on the rear or side wall
of the counter substructure or a country-specific single-phase socket. If the
mains connection lead for this device is damaged then it must be replaced
by our customer service personnel or a similarly qualified person. The mains
cable must not come into contact with hot surfaces. The socket is part of the
customer's on-site installation.
User Manual WMF 1400
67