Table of Contents
Advertisement
Plug&clean
Cleaning of the Plug&Clean consists of three parts.
•
Automatic foamer rinsing for a maximum of 3 minutes
after each beverage with milk or milk foam
•
Display guided milk system rinsing
once per week
•
, lay combi spout, milk hose and milk
nozzles in a cleaning solution
5.3
choc system rinsing
Choc system rinsing is interim cleaning of the mixer.
See Cleaning instruction for Choc system rinsing.
5.4
general cleaning
grounds container cleaning (grounds chute, optional)
Empty the coffee grounds container and rinse under
™
running water
Clean with a clean, damp cloth
™
Drip tray, housing and front panel
™ Clean the cold machine using a damp cloth
Wipe dry using a fine woolen cloth or chamois leather
™
cleaning metal surfaces
For cleaning metal housing parts (matte surface), we
recommend WMF Purargan® forte cleaner.
Do not clean with scouring powders or similar.
There is a risk of causing scratches or scores.
Do not use any sharp cleaning materials or implements.
User manual WMF bistro!
Care
caUtioN
Health hazard.
Follow the hygiene
instructions.
See HACCP schedule
in chapter 6.
Plug&Clean cleaning program
w Cleaning instruction
The Choc system rinsing is an
integral part of the cleaning
program.
Order numbers for the WMF care
program
w Appendix C
Accessories and spare parts
page 66
Switch off the machine before
cleaning the front panel to avoid
a beverage being accidentally
dispensed.
NoticE
Follow the instructions
beside.
See chapter 9.5: Warranty.
45
Hide quick links:
Advertisement
Table of Contents
