Wireless Lan - HP iPAQ rx3000 series User Manual

Wireless LAN

For more information on Wireless LAN, refer to
"Using Wi-Fi."
Problem Solution
I cannot connect • Be sure the WLAN is on.
to an access
• Be sure the device identified the network you want to
point.
connect to.
• Be sure you provided any necessary authentication keys if
prompted by the system.
• Be sure your HP iPAQ is within range of the access point.
I am connected to If the wireless network you are connected to connects to Work,
an access point, the network may require a proxy. To set up the proxy:
but I cannot
1. Ask your network administrator for the proxy settings.
browse the
2. Tap the Connections icon > Add Proxy Server.
Internet.
3. Refer to
I do not see Your wireless network could be a non-broadcasting network.
my wireless
1. Tap the Connections icon > Settings.
network on my HP
2. Tap the Advanced tab > Network Cards > Add New
iPAQ.
Settings.
3. Follow the instructions on the screen.
My data transfer • If Bluetooth is on, turn it off.
rate is too low.
• Turn off the Power Save modes for Wireless LAN. Refer to
Chapter 8, "Using Wi-Fi"
User's Guide
Chapter 8, "Using Wi-Fi"
for more information.
www.hp.com
Troubleshooting
Chapter 8,
for more information.
12–9