HP iPAQ rx3000 series User Manual page 251

9. Open ActiveSync on your computer, then click File >
Connection Settings.
10. Check the Allow Serial Cable or Infrared Connection to
this COM Port box.
11. Select the COM port that is the same as the one you wrote
down earlier, then click OK.
Setting Up an ActiveSync Partnership
on Your HP iPAQ
To establish an ActiveSync connection:
1. From the Today screen, tap iPAQ Wireless > Bluetooth >
Manager.
2. Tap New > ActiveSync via Bluetooth > Next.
User's Guide www.hp.com
Using Bluetooth
9–18