Exiting Nevomedia Player; Using Nevobackup - HP iPAQ rx3000 series User Manual

No checkmark next to the option indicates that Now Playing is
off. To turn it on, click Now Playing.
Note:
The default NevoMedia Player Now Playing setting is on.

Exiting NevoMedia Player

NevoMedia Player shuts down automatically every time
NevoMedia Server shuts down if you haven't changed the default
settings in NevoMedia Server.
Note:
For information on the NevoMedia Server settings, see the
NevoMedia Server help file. Tap Start > Help > Nevo.
To exit and close the NevoMedia Player application, click File >
Exit.
Note:
Keep in mind that if you click the Close icon, NevoMedia
Player hides until you use it again to play media.

Using NevoBackup

NevoBackup is installed along with NevoMedia Server and
NevoMedia Player when you install the Mobile Media for PC
components from the Companion CD. This application
automatically protects your Universal Remote Control settings
from loss due to a power failure or full reset of your HP iPAQ.
Once NevoBackup is installed and is running, your two-most
recent home entertainment device settings are automatically
saved each time you cradle your HP iPAQ as Current
Configuration and Previous Configuration. You can also use
the Wizard to set custom save points to save a particular
configuration. NevoBackup is configured to run when your
personal computer starts. You can access NevoBackup by right
User's Guide
Getting to Know iPAQ Mobile Media
6–33