HP iPAQ rx3000 series User Manual page 205

Easy Channel Setup
If you choose Easy Channel Setup, the Master Control
Channel Device screen appears.
The Master Control Wizard allows you to set up how you
normally change the channels. The following table describes your
options:
Tasks
2 Digits
3 Digits
4 Digits
+10/100 or --/--- required
"Enter" required after the
digits
1. Review your channel options, then tap Next.
2. Enter the channel number of the favorite you want to add,
then tap Test.
3. Tap Next.
4. Label your favorite, then tap Next.
5. Select the icon you want to associate with your favorite, then
tap Done.
User's Guide
Getting to Know iPAQ Mobile Media
Functions
Your device allows you to change to a
2-digit channel by only pressing 2
digits.
Your device requires you to enter 3
digits to change the channel.
Your device requires you to enter 4
digits to change the channel.
Your device requires you to press
+10/100 or --/--- to get to channel
numbers larger than 10/100.
Your device requires you to select
Enter to change the channel.
Note: You may also want to select
this option if the channel changes
more quickly when you press Enter.
6–86