Changing The Backlight Settings; Changing The Wireless Lan Power Saving Modes - HP iPAQ rx3000 series User Manual

Changing the Backlight Settings

To change the backlight settings in order to conserve more battery
power:
1. From the Start menu, tap Settings > System tab >
Backlight.
2. Select the following backlight settings:
■
Brightness
■
Battery Power
■
External Power
Battery Saving Tip: Set the backlight to go off quickly after
you stop using your HP iPAQ, or move the slide bar to Power
Save mode to turn off the backlight completely. You can turn
the backlight back on (or off) by pressing and holding the
Power button for three seconds.
Changing the Wireless LAN Power Saving
Modes
To change Wi-Fi (WLAN) power saving modes:
1. From the Start menu, tap Settings > System tab > Power >
Wireless tab.
2. For WLAN Power Save mode, select:
■
OFF—No WLAN Power Save. Use only if the absolute
highest WLAN throughput is required or if your network
configuration does not support these modes.
■
Auto—Automatically switches between Power Save and
no power save.
User's Guide www.hp.com
Managing the Battery
10–9