Disabling The Application Buttons - HP iPAQ rx3000 series User Manual

■
Extended—Uses the least battery power while
maintaining a Wi-Fi connection. This mode significantly
reduces the Wi-Fi data throughput.
It is not recommended for large file transfers.
Note:
The Extended power-saving mode is not recommended if
Bluetooth is also on.

Disabling the Application Buttons

Pressing the Application Buttons on your HP iPAQ will turn on
your device by default.
Battery Saving Tip: To reduce incidence of accidentally
powering on the HP iPAQ, you may choose to disable the
Application and Image Capture Buttons Auto Power On
feature.
To disable the Auto Power On function of the Application
Buttons or the Image Capture Button:
1. Tap Start > Settings > Buttons > Lock tab.
2. Tap in the Disable all buttons except power button
checkbox
3. Tap OK.
Note:
If you disable the Auto Power On feature for the
Application Buttons, the Power Button still turns on the unit.
Once the unit is turned on, all buttons will function according
to their programmed functions.
User's Guide www.hp.com
Managing the Battery
10–10