Datalogic Firmware Utility; Retrieving A Firmware Image Update - Datalogic Memor X3 User Manual

4
4.8

DATALOGIC FIRMWARE UTILITY

The Datalogic devices are equipped with a field upgradeable firmware mechanism.
Firmware updates are available on the Datalogic website:
http://www.datalogic.com/eng/support-services/automatic-data-
capture/downloads/software-utilities-sw-2.html.
After you have downloaded the desired update, there are several ways you can
update the firmware on your device.
−
Use Wavelink Avalanche™ if you have multiple Datalogic devices to update.
For more information refer to the dedicated section of the Wavelink website:
http://www.wavelink.com/Datalogic-device-downloads.
−
If Wavelink Avalanche™ is not available or you have only a few Datalogic
devices to update, use the Datalogic Firmware Utility (DFU), described below,
to install or update the firmware using an ActiveSync connection.
The following sections provide procedures for the retrieval and installation of the
latest firmware image onto a Datalogic device.
4.8.1

Retrieving a Firmware Image Update

The following instructions use Internet Explorer to retrieve the latest firmware image.
1. Launch Internet Explorer on your PC and navigate to the Datalogic website.
2. Navigate to the Downloads section of the website.
3. Using the device selection fields,
click Save to begin copying the files to your local machine (or local network
location).
80
s
elect the file you want to download, then
1 MEMOR™ X3