Regulatory Information; General Safety Rules; Power Supply - Datalogic Memor X3 User Manual

REGULATORY INFORMATION

Read this manual carefully before performing any type of connection
to the Memor X3 mobile computer.
The user is responsible for any damage caused by incorrect use of
NOTE
the equipment or by inobservance of the indication supplied in this
manual.

GENERAL SAFETY RULES

−
Use only the components supplied by the manufacturer for the specific
Memor X3 being used.
−
Do not attempt to disassemble the Memor X3 mobile computer, as it does not
contain parts that can be repaired by the user. Any tampering will invalidate the
warranty.
−
When replacing the battery pack or at the end of the operative life of the
Memor X3 mobile computer, disposal must be performed in compliance with the
laws in force in your jurisdiction.
−
Before using the devices and the battery packs, read chap. 2.
−
Do not submerge the Memor X3 in liquid products.
−
For further information, refer to this manual and to the Datalogic web site:
www.datalogic.com.

POWER SUPPLY

This device is intended to be connected to a UL Listed/CSA Certified computer which
supplies power directly to the Memor X3 or else be supplied by a UL Listed/CSA
Certified Power Unit marked "Class 2" or LPS power source rated 5 V, 3.0 A, which
supplies power directly to the Memor X3 via the power connector of the cable.
The package includes three international plug adapters. The adapters must be
plugged in the power supply before the power supply itself is plugged on the wall
outlet.
118