Editing From A Camcorder To Your Vcr; Specifications - Sharp VC-H670X Operation Manual

Video cassette recorder
Table of Contents

Advertisement

Editing from a Camcorder to Your VCR

Editing from your Camcorder is extremely easy using your VCR with a linear tape counter, etc. The connection
diagram below is for a guideline only. Refer to your Camcorder Operation Manual for precise connection
information.

Specifications

Format: VHS PAL standard
Video recording system: Two rotary heads, helical scan
Video signal system: PAL colour or monochrome signals: 625 lines
Hi-Fi audio recording system: Deep-layer recording system conforming to stereo Hi-Fi VHS standard
Maximum playing time: 480 min. with E-240 video cassette in LP mode
Tape width: 12.7 mm
Tape speed: 23.39 mm/set. SP; 11.70 mm/set. LP
Antenna: 75 Ohm unbalanced
Reception channels: VHF channel 0 to 12, UHF channel 28 to 69
RF output signal: UHF channel 28 to UHF channel 69 (preset to UHF channel 37)
Power requirement: AC 240 V, 50 Hz
Power consumption: VC-H670X:
Operating temperature: 5°C to 40°C
Storage temperature: - 20°C to 55°C
Video input: 1 .O Vp-p, 75 Ohm
output: 1 .O Vp-p, 75 Ohm
Audio input: (phono type) Line: -8dBs, 47 kohm
output: (phono type) Line:
Hi-Fi audio: Dynamic range: Typically 90 dB
Dimensions: 360 (W) x 283.5 (D) x 93 (H) mm
Weight: 3.3 kg
Supplied accessories: R6 (AA, UMISUM-3) battery x2
(Front)
L2: (LINE IN 2)
W
16
VC-H690X:
17 W (approx.)/l .O W
, 1 kohm
Frequency response: 20 Hz-20 kHz
Wow and flutter: less than 0.005% Wrm
Design and specifications are subject to change without notice.
Max (at Low Power Mode)
Max (at Low Power Mode)
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vc-h690x

Table of Contents