Table of Contents
Advertisement
Still Picture and Frame Advance
PAUSE/STILL (F.ADV) during still mode for frame advance.
Press
Double Speed Playback
Sound is muted during video search, slow motion, still picture, frame advance, and double speed playback.
l
still picture.
During slow motion, still, frame advance and double speed playback with a tape recorded in the LP mode, the upper part
l
of the picture may be skewed to one side.
Colour Mode
If a colour recording's quality is poor, the picture may turn
black and white. In this event, set the COLOUR mode on
the MODE selection screen to PAL (strict PAL colour
mode). Normally, the colour mode should be set to
"AUTO" mode.
(See Mode Selection on page 17.)
When the colour mode is set to frxed co/our mode while the
l
VCR is playing back a black and white tape or is receiving a
black and white broadcast, the picture may be coloured. In this
event, set the COLOUR mode on the MODE selection screen to
"AUTO" mode.
NTSC Tape Play Back on PAL TV
When you play back an NTSC tape on your VCR, it is possible to use a PAL or multi-
system compatible TV. However, please note the following:
not indicate a malfunction in your TV or VCR.
However, if you use a TV with a V-HOLD control, you can stop the rolling by adjusting the
V-HOLD control and watch the picture.
Horizontal noise bars may appear on the screen during special effect playback (video search, still, slow, frame
l
advance, and double speed playback), possibly accompanied by discolouring.
*Although NTSC tapes can be played back onto a PAL TV, those tapes cannot be dubbed by a PAL system
VCR connected to the AUDIO OUT and VIDEO OUT terminals of this product. Tapes recorded in this way
cannot be played back on PAL system VCRs.
*Set the COLOUR mode to AUTO. If the COLOUR mode is set to PAL, you cannot play back the tape.
2 0
(Change with 4 or F .)
Then press SET.
Playback
PAL dour made
Advertisement
Table of Contents
