Low Power Feature - Sharp VC-H670X Operation Manual

LOW POWER Feature

This model is equipped with a LOW POWER feature to save energy when the VCR is not in use
button
STANDBY/LOW POWER
Clock keeps time regardless
of this button
I
1. Definitions of POWER modes
POWER ON mode
POWER STANDBY mode
LOW POWER mode
2. In POWER ON mode
Each time STANDBY/LOW POWER
STANDBY for VC-H670X) is pressed, the POWER MODE changes as shown below.
(Current)
POWER ON mode
LOW POWER mode cannot be used when the programmable timer is set to TIMER ON.
l
3. Switching from POWER STANDBY or LOW POWER mode to POWER ON
mode.
mode.
tape in the VCR, the mode will automatlcally switch to POWER ON and the tape operation will begin.
This VCR is not equipped with a mains power switch. Accordingly, nominal
current to drive the clock
plugged into a wall socket. If the VCR
be sure to unplug the cord.
VCR in operation or ready for operation.
l
VCR display is on.
l
VCR in standby mode.
l
VCR display is on.
l
VCR display is off, but clock continues to keep time.
l
. Noise may appear on the screen when watching TV in this mode. If this
occurs, switch to POWER STANDBY mode.
This mode cannot be used when the programmable timer is set to
l
TIMER ON.
the
on VCR or the remote control
loaded
drawn at all times when the AC power cord is
IS
not to be used for an extended period,
IS
(VCR STANDBY for VC-H690X,
LOW POWER mode
5