Recording With The Timer - Sharp VC-H670X Operation Manual

Recording with the Timer

The timer can be set manually for automatic recording of up to 8 events over a 365 day period.
PREPARATION
Select the video channel on your TV. Turn on the VCR (See page 5, item 3).
l
Load the cassette, ensuring the erasure
l
Check that the clock is displaying the correct time. (See Setting the Clock
l
PROCEDURE
Example: Recording channel position 47 in SP mode from 12:OO PM to 12:30 PM, December 15, 1998, if the
present time is lo:28 (morning), December 14, 1998.
[Timer position]
. . iCRIlCE
. .:EELECT
[Channel]
Numeric
buttons
l
Press 0 first if the day, month, hour or minute
l
28
hole is covered. The VCR power will automatically turn on.
protection
Select the TIMER-setting mode and press SET.
0
If the timer positions 1 to 4 have already been set, the
l
screen changes 212 (timer positions 5 to 8).
or A/V on the remote control and then press b.
. First set the "day" digits and then "month". If there is
only one "day" or one "month" digit, enter a 0 first.
time each day or "W (WEEKLY)" to record at the same
time each week by pressing A or v, and then pressing
[Daily/Weekly]
. .
AUDIO/VIDEO terminal on the VCR, press A/V to select an AV
channel (When an AV position is selected, "Ll" or "L2" is displayed
where a channel position number is usually displayed.)
a single drgit.
IS
on page 12.)
Continued on next page